12V 24V Input 0-10V Dc Adjustable Power Supply 0-10V Dimming Led Driver
Testing procedure:
1. Before connecting the control wiring to the control card, energize the circuit.
2. Measure AC and DC voltage on the control wires from pole to pole and each pole to ground. If any measurement exceeds 20V additional voltage isolation is required or there may be a problem driver on the line. Do not connect wiring to the control card until this condition is resolved.
3. Observe that all fixtures are full bright when control wires are open and that when shorted all fixtures on the circuit go to their minimum level. If some or all fixtures do not dim, there is a problem with drivers or field wiring. The controller cannot address this kind of problem.
4. If all of the above tests pass, turn off the circuit and connect the wires to the control card.
Product Specification
| Product name: | 150W power supply | Input Voltage: | 100V~277V AC |
| Lighting solutions service: | Lighting and circuitry design | Output Frequency: | 47~63HZ |
| Product Weight(kg): | 0.8 | Output Current: | 1500 MA, 30 A, 750 mA, 3000 ma, 350 mA, 1800 MA, 600 mA, 300 MA, 1200 MA, 1050 mA, 2.5-4.5A±3% |
| Place of Origin: | Guangdong, China | Warranty(Year): | 5-Year |
| Output Power: | 150W | Voltage: | 100V~277V AC |
| Output Type: | Multiple | Frequency: | 47~63HZ |
| Customization: | Can provide | Input Max Current: | 1.7A |
| Operation Life: | 5 years | Application: | All LED Light |
| Ambient Temperature: | -40℃ ~ 80℃ | Power: | 150W |
What is your advantages?
1. OEM/ODM is welcome, over 15 years of experence.
2. High efficiency, low power consumption led light driver.
3. CE(TUV),RoHs, SAA, C-tick,RCM, FCC and ETL approved.
4. Stable quality, burn-in tests with 100% full load for more than 4 hours.
5. Over-heat, over-load, short-circuit & open-circuit protection.
6. Offer 3 or 5 years warranty and maintain our repair rate below 0.3%.
7. We will apply 0.3% spare parts on bulk orders.
8. Professional team will follow the whole after-sale.
FAQ
Q1. Are you a manufacturer?
A: Yes, we are the manufacturer.We have one factory in shenzhen, Guangdong, China.
You are warmly welcome to visit our factory.
Q2. Can I get sample?
A: Sure, If you need sample, pls tell me your spec need, or tell me your led light info, then i will recommend you
suitable led driver with good price, after confirm details, we will arrange the samples for you to test. Welcome sample
order to test and check quality.
Q3. Is it OK to print my logo on led driver & light product and use my own package and trade mark?
A: Yes. Normally we offer white inner box and carton box. Use your own design is ok. Please inform us
formally before our production and confirm the design firstly based on our sample.
Q4: Does your company accept OEM&ODM?
A: Yes, welcome OEM&ODM.
