12V 24V DC 60W 5A Output Transformer Low Voltage LED Strip Power Supply For LED Lights
Linear Power supply
It's a power supply that use Linear Transformers to regulate the voltage . Working principle is based on mutual induction . These power supplies have large Transformers (Depending on the output current and voltage ). To convert the AC output of the transformer to DC this power supplies have half or full bridge rectifiers (depend on the type of the transformer) and then smooth that voltage using capacitors.
Product Description
1.International AC input range
2.High efficiency,low working temperature
3.Short circuit,overload,over-current protection
4.100% fully load burn-in test
5.Built-in EMI filter, low ripple noise
6.Low cost, high reliability
7.CE and Rohs approval
8.OEM and ODM is welcome
Product Specification
| AC input voltage range | 110-264VAC |
| Input current | 0.5A/115V 0.25A/230V |
| AC impulse current | Cold-start current 13A/115V 26A/230V |
| DC output voltage | 12V | 24V |
| DC output power | 350W | 350W |
| Rated output current | 30A | 15A |
| Output voltage error | ±1% | ±1% |
| Efficiency | 85% | 85% |
| Wave and noise | 100mVp-p | 100mVp-p |
| Inlet stability | ±0.5% | ±0.5% |
| Load stability | ±0.5% | ±0.5% |
| Leakage current | <0.5mA/240VAC |
| Overload protection | 105% - 150% rated power, automatically recovery |
| Vibration | 10500Hz,2G 10min./1cycle,Period for 60min,Each axes |
| Cooling method | Natural cooling air convection |
| Working temperature and humidity | - 20 ° ~ 60 ° c / 20% ~ 90% RH (no frost) |
| Store temperature and humidity | - 40 ° ~ 85 ° c / 10% ~ 95% RH (no frost) |
| Safety standards | CE(EMC+LVD),Rohs |
| Dimension | 215x115x50mm |
| Weight | 0.8kgs |
Voltage and current ratings of the Power supply .
The voltage rating for LED strings and controllers are usually 5Vdc (This may change with the controller model and Pixel LED string type).contact your seller or the manufacturer for the correct voltage rating .
How to calculate the current rating requirement of the power supply -
Maximum current is taken when a Pixel LED is illuminating at white color. R.G.B values (255,255,255).The current taken by the Pixel LED depends on the type of Pixel LED you are going to use .The current taken by the driver chip can be found in the datasheet .
You can also check the pixel LED current by powering up a single Pixel LED without data and check the current taken by it using a multimeter .Connect the multimeter probs in series with the LED and the power supply ( put the multimeter in Amp scale)
Application
1. Digital and electronic products
2. 3D Printer
3. Fiber transceivers, game player, LED, CCTV camera
4. Electrical equipment, Instrumentation
5. Industrial equipment
6. Communications and security products;
7. LED Strip Lighting/ LED lamp / LED Lights
8. LED Display, etc.
FAQ
Q1. Can I have a sample order for LED Power Supply?
A: Yes, sample order for testing and reviewing our quality is available. Mixed samples are acceptable.
Q2. What about the lead time?
A: Samples order: 1-3 days, mass production time are normally in 25days after deposit.
Q3. What is your MOQ of the LED power supply?
A: 50pcs or 100pcs for trial order.
Q4:How many year warranty of your Led driver?
A: Two years.
Q5: OEM/ODM available:
A:1.print logo on the sickers or LED powers.
2.Any request on the power supply, we can help you to design and put it into production.
Q6: What kinds of certificate we achieve?
A:CE, ROHS, FCC.
Q7: How to ship these goods?
A:By airline or by sea.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.3%.
Secondly, during the guarantee period, we will send new power supply with new order together. For defective batch products, please send the pictures or videos for them, if possible, we can discuss the solution according to real situation.
